The Miles M.14 Magister is a British two-seat monoplane basic trainer aircraft built by the Miles Aircraft for the Royal Air Force and Fleet Air Arm. Affectionately known as the Maggie, the Magister was based on Miles' civilian Hawk Major and Hawk Trainer and was the first monoplane designed specifically as a trainer for the RAF. As a low-wing monoplane, it was an ideal introduction to the Spitfire and Hurricane for new pilots.
Our own design of the Miles Magister in an 82" wingspan for 120 size engines is a premium quality kit which includes quick and easy interlocking construction for a simple yet accurate build, along with precise vacuum formed parts to take care of the shapes around the engine cowl and wing fillets. This is a kitset that you could build into a competition level scale aircraft.
- Wingspan: 82" / 2082mm
- Number of channels: 5
- Recommended engine size: 120 size four stroke
- Includes full sized rolled plan
Materials Required For Short Kit Airframe Completion:
(These materials are included in the Complete Airframe Kit)
- 2.0 x 100 x 915 Balsa Sheets x 16
- 2.0 x 100 x 1220 Balsa Sheets x 4
- 3.0 x 100 x 915 Balsa Sheets x 1
- 6.5 x 100 x 915 Balsa Sheets x 1
- 9.5 x 100 x 915 Balsa Sheets x 2
- 5.0 x 6.5 x 915 Balsa Sticks x 4
- 6.5 x 6.5 x 915 Balsa Sticks x 6
- 6.5 x 9.5 x 915 Balsa Sticks x 6
- 12.5 x 12.5 x 300 Hardwood Engine Bearers x 2
- 0.6 x 300 x 900 Bass Plywood x 2
- 3/32" x 915 Music Wire x 1
Short Kit Or Complete Airframe Kit?
A Short Kit includes a full size printed plan and all of the laser cut parts that are required as part of the complete airframe build.
Items such as wing ribs, dihedral joiners, fuselage formers & fuselage parts, doublers, bulkheads and so on.
Every part which is a complex cut is precisely laser cut as per the plan and included in the short kit. Some kits may also include vacuum formed ABS parts like canopies or cowlings.
With a Short Kit, the only items you need to add to the laser cut parts to build a complete airframe are components which are simply cut to length. Parts such as wing spars, wing sheeting or fuselage sheeting for example.
A Complete Airframe Kit includes the Laser Cut Short Kit, plus the entire list of additional materials required to complete the airframe build.
Select this option when adding to your cart to purchase all of the materials required to complete the airframe build.
Every kit includes a full size printed plan, and where available the designers original construction notes. The kits do not include miscellaneous hardware such as pushrods, control horns, hinges, wheels etc.