AcroOne 58" 45 - 60 Size

With our AcroOne we followed the design principles of the low wing acrobatic trainer, but put our spin to it.

The wings are light weight build up, single piece with 3deg washout for good stall handling. Single piece canopy for easy build and a simple vac formed cowling.

A battery compartment and hatch is part of the design.

The kit includes all parts required to build including pushrods, horns, hinges when you get the complete kit.

You need to provide the RC gear & motor (IC or electric) and covering and you are ready to go.

We used a .50 IC or a 80A 4S 4220 880Kv electric motor.

Specifications:

• Wingspan: 58" / 1490mm
• Number of channels: 4
• Recommended engine size: 45 - 60 two stroke
• Includes full sized rolled plan

Materials Required For Short Kit Airframe Completion:
(These materials are included in the Complete Airframe Kit)

• 1.5 x 75 x 915 Balsa Sheet x 4
• 3.0 x 100 x 915 Balsa Sheet x 2
• 3.0 x 5.0 x 915 Balsa Sticks x 2
• 5.0 x 5.0 x 915 Balsa Sticks x 4
• 9.5 x 9.5 x 915 Balsa Sticks x 2
• 6.5 x 12.5 x 915 Spruce x 5
• Pushrods, Hinges, Control horns
• Landing gear

Documents:

• Preview the Plan
• View the Laser Cut Parts

Short Kit Or Complete Airframe Kit?

A Short Kit includes a full size printed plan and all of the laser cut parts that are required as part of the complete airframe build.

Items such as wing ribs, dihedral joiners, fuselage formers & fuselage parts, doublers, bulkheads and so on.

Every part which is a complex cut is precisely laser cut as per the plan and included in the short kit. Some kits may also include vacuum formed ABS parts like canopies or cowlings.

With a Short Kit, the only items you need to add to the laser cut parts to build a complete airframe are components which are simply cut to length. Parts such as wing spars, wing sheeting or fuselage sheeting for example.

A Complete Airframe Kit includes the Laser Cut Short Kit, plus the entire list of additional materials required to complete the airframe build.

Select this option when adding to your cart to purchase all of the materials required to complete the airframe build.

Every kit includes a full size printed plan, and where available the designers original construction notes. The kits do not include miscellaneous hardware such as pushrods, control horns, hinges, wheels etc.