Welcome to hangaronekits
At hangaronekits we are passionate aeromodellers and manufacturers of quality laser cut aircraft kitsets. Quality is assured because we hand select the the best balsa wood from Papua New Guinea and European Plywoods for each kitset.
Our kitsets are made to order daily, and are shipped worldwide. Simply add any product to your shopping cart to find out the shipping cost to your location.
UK Customer Update
The UK Government require a business to be VAT registered if they are selling products worth less than £135 into the United Kingdom. Some of our short kits and full kits do not meet the required threshold of £135. We are reluctant to send these as they could be turned back or destroyed. Normally kits over this value are passed through to the local post office where the VAT is paid. Please take this into consideration when ordering. If you desperately want to buy the kit, consider getting together with a friend and order an extra kit to get around this bureaucracy!
We have been investigating shipping options to give our customers an alternative to the service we offer. We have had some issues that have been caused by the breakdown of some countries international courier services during the current pandemic that has engulfed most countries. We have been trialing a local company that offers a service with DHL - at this point it seems to be a slightly more expensive service but it does seem to be more reliable given DHL has its own transport network. The company is Jetkrate and can be found here.
There will be a slightly different ordering system than currently offered. If you want to utilize these people, the best way will be to contact us, requesting to use the service , we will generate an invoice for you for the kit less the freight component, then you can register with these people to pick up the kit and dispatch it to you after freight payment.
If you have any questions, please dont hesitate to contact us.
Take care and stay safe
View Our Range Of Kitsets
Latest News & Kitsets
The 93" Super Sinbad
We have taken those gorgeous, classic lines of the Super Sinbad Free Flight Glider from 1943 and scaled it up to a 93" 2 channel glider for slope or bungee launch.
The body is built in two halves using an arrangement of formers, allowing you to keep that open structure but still build an accurate fuselage. The two piece wing uses the original aerofoil and is joined through a strong centre spar box with a 3mm laser cut steel wing joiner.
Takahe Build Log On RC Groups
If you would like to see how our kitsets go together, check out these RC Groups Build Logs on the Takahe glider kitset, a modern take on those classic RC gliders from the 70's and 80's.
It's a 3 channel RES glider and can be built as either 100" or 110" wingspan. The kit includes a pure glider nose bulkhead, and an optional electric motor nose mount bulkhead.
John Grant, New Zealand
Hi Pete. Thanks for your prompt attention to my kitset order, it arrived without a mark on it. The laser cutting is the best I've seen, even better than the SIG kit sets I have. I will pass the word around our club over here.
Harvey Stiver, New Zealand
Hi Pete. I have finished the Buzzard Bombshell from your semi kit. The accuracy of parts along with extra strip wood were of top quality. Have finished model in Solarfilm, powered by a Scorpion electric motor, came out all up at 4lbs. 8ozs. Test flew yesterday with only down thrust needed. A great project and a worthy addition to my vintage stable.
Ian Thompson, Australia
Hi Pete. The Slingsby kit has just landed (pun intended). I haven’t had the chance to unpack the laser cut parts yet but going by Darryl’s comments they will fit like a glove. Also the plans are the best I have seen in a long time and I have been modelling for more than 50 years!!